Description
This indicator allows you to use a calculation function for the measured value
Ax+B+Cx-1
- The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement)
- Coefficients A,B and C are freely definable. X = displacement of the plunger
- Analogue bar graph in the display (14 different scales switchable)
- GO/?NG tolerance judgement function
- MAX/MIN/RANGE function to measure peak values
- A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
- Easy indicator setup via a setup menu
- A USB interface box can be used to set up the indicator from PC via dedicated software
Specification
| DATA/HOLD: | Yes |
| PRESET 3x: | Yes |
| Digital/Analog: | Digital |
| Inch-Metric: | Inch/Metric |
| Range: | 2″/50.8 mm |
| Range: | 2″ |
| Max. Permissible Error E MPE: | 0,00025″/0,006 mm |
| Hysteresis: | 0,0001″/0,002 mm |
| H MPE (Hysteresis): | 0,0001″/0,002 mm |
| R MPE (Repeatability): | 0,0001″/0,002 mm |
| Digimatic data output: | Yes |
| Measuring force: | ?2,3 N |
| Type: | EN ISO Standard |
| Protection: | IP42 |
| Display: | LCD, character height 8 mm, rotatable 330? |
| Max. response speed: | Unlimited |
| Measurement frequency (MAX/MIN/RANGE): | Standard mode: 10 times/s fast mode: 50 times/s (plunger speed max. 50 ?m/s for peak measurement) |
| Alarm: | Low voltage, ABS composition error, overflow error, tolerance limit setting error |
| Stem ?: | 8 mm |
| Contact point: | Carbide ball, thread M 2.5 x 0.45 mm |
| Power supply: | 1 battery CR-2032 |
| Battery life: | Standard mode: approx. 1 year fast mode: approx. 4.5 month |
| Delivered: | Including 1 battery |
| Mass: | 260 |
| ON/OFF: | Yes |
| MAX/MIN/RANGE: | Yes |
| ABS / INC (INC ZERO): | Yes |
| Selectable resolution: | Yes |
| Function lock: | Yes |
| GO/?NG judgement: | Yes |
| Calculation function (with formula): | Yes |
| Fast measurement mode: | yes |
