Pelican – AL3418-1005-RP-032 Trusted for over 40 years by the US Military, Single Lid Cases offer 20% more protective material in the edges and corners, where it is needed most, ensuring that valuable equipment is kept safe from any unforeseen elements. Available in several sizes, these cases are completely customizable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.
Features
- One-piece construction, molded from lightweight, high-impact polyethylene
- Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
- Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
- Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
- Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
- Reinforced corners and edges for additional impact protection
- Recessed hardware for extra protection
Additional Information
Interior (L×W×D) Dimension34.18 x 17.87 x 15.37 in (86.8 x 45.4 x 39 cm)Exterior (L×W×D) Dimension37.18 x 20.87 x 17.31 in (94.4 x 53 x 44 cm)Lid Depth5.25″ (13.3 cm)Bottom Depth10.12″ (25.7 cm)Total Depth15.37″ (39 cm)Int Volume5.43 ft³ (0.154 m³)Weight30.60 lbs (13.9 kg)Buoyancy457.71 lbs (207.6 kg)Body MaterialRotoMolded PolyethyleneLatch MaterialSteel (Nickel-black Plated)O-Ring MaterialSilicone SpongeFoam MaterialNo Foam, empty case standard. Optional PE and PU, 1 and 2 lb. options filled and linedPurge Body MaterialAluminumPRV Valve Material.5 PSI Standard, Light Lift .25 PSIHandle MaterialHeavy Duty Injection Molded StandardOptional Handles MaterialStainless Steel Passivate and Stainless Steel BlackHardware MaterialYellow Carbon Steel StandardOptional Hardware MaterialBlack Carbon Steel, Stainless Steel Passivate and Stainless Steel BlackMinimum Temperature-20° F (-29 ° C)Maximum Temperature140° F (60 ° C)Testing
Pelican-Hardigg Single Lid style roto cases have been designed and tested to meet or exceed the applicable requirements of the following standards. Qualification is conducted through direct testing and/or engineering analysis of product and test similarity; testing has been conducted on containers of various sizes and configurations as applicable.
- MIL-STD-810E, Method 505.3, Procedure IISOLAR RADIATION
- ASTM E96, MIL-C-4150J and ASTM D 1008-64WATER-VAPOR TRANSMISSION RATE (PERMIABILITY)
- FED SPECIFICATION L-P-390c, Type M.TENSILE/ELONGATION/COMPRESSIVE/FLEXURAL
- FED-STD-101, Method 5009LEAK TEST
- FED-STD-101, Method 5016 DOT 49CFR 178.350CONCENTRATED LOAD (STACK/SUPERIMPOSED)
- FED-STD-101, Method 5011HANDLING
- MIL-STD-810E, Method 514.4VIBRATION (COMPOSITE INPUTS)
- MIL-STD-810E, Method 516.4, procedure IVSHOCK (TRANSIT DROP)
- MIL-STD-810E, Method 501.3, procedure ITEMPERATURE (STORAGE, HIGH TEMPERATURE)
- MIL-STD-810E, Method 502.3, procedure ITEMPERATURE (STORAGE, LOW TEMPERATURE)
- MIL-STD-810E, Method 507.3, Procedure IRELATIVE HUMIDITY
- MIL-STD-810E, Method 500.3ALTITUDE (LOW PRESSURE)
- MIL-STD-210C MIL-STD-810D, Method 510.2, Procedure ISAND AND DUST
- MIL-STD-810E, Method 509.3, Procedure I @ 5%SALT FOG
- MIL-STD-810D, Method 508.4FUNGUS
- MIL-STD-810D, Method 506.2, Procedure IRAIN WITH WIND
- MIL-STD-810D, Method 512.2, Procedure IIMMERSION ONE (1) METER
- ATA 300, Category IREQUIRMENTS FOR REUSABLE CONTAINERS
